Online Submissions

Already have a Username/Password for Journal of Analytical Techniques?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.


Author Guidelines

Instructions for Advanced Research Journals authors

Publication and peer review processes
Submitted manuscripts will be sent to peer reviewers, unless they are either out of scope or below threshold for the journal, or the presentation or written English is of an unacceptably low standard. They will generally be reviewed by two experts with the aim of reaching a first decision as soon as possible. Reviewers do not have to sign their reports but are welcome to do so. They are asked to declare any competing interests.Reviewers are asked whether the manuscript is scientifically sound and coherent, how interesting it is and whether the quality of the writing is acceptable. Where possible, the final decision is made on the basis that the peer reviewers are in accordance with one another, or that at least there is no strong dissenting view. In cases where there is strong disagreement either among peer reviewers or between the authors and peer reviewers, advice is sought from a member of the journal's Editorial Board. The journal allows a maximum of two revisions of any manuscript. All appeals should be directed to the Editor. The ultimate responsibility for editorial decisions lies with the Editor-in-Chief.Once an article is accepted, it is published in Advanced Research Journals immediately as a provisional PDF file. The paper will subsequently be published in formatted PDF. 

Editorial policies Any manuscript or substantial parts of it, submitted to the journal must not be under consideration by any other journal although it may have been deposited on a preprint server. The manuscript should not have already been published in any journal or other citable form, with the exception that the journal is willing to consider peer-reviewing manuscripts that are translations of articles originally published in another language. In this case, the consent of the journal in which the article was originally published must be obtained and the fact that the article has already been published must be made clear on submission and stated in the abstract. Authors who publish in Advanced Research Journals retain copyright to their work. Correspondence concerning articles published in Advanced Research Journals is encouraged through the online comment system.Submission of a manuscript to Advanced Research Journals implies that all authors have read and agreed to its content, and that any experimental research that is reported in the manuscript has been performed with the approval of an appropriate ethics committee. Research carried out on humans and any experimental research on animals must follow internationally recognized guidelines. A statement to this effect must appear in the Methods section of the manuscript, including the name of the body which gave approval, with a reference number where appropriate. Informed consent must also be documented. Manuscripts may be rejected if the editorial office considers that the research has not been carried out within an ethical framework, e.g. if the severity of the experimental procedure is not justified by the value of the knowledge gained.Generic drug names should generally be used. When proprietary brands are used in research, include the brand names in parentheses in the Methods section.Advanced Research Journals requires authors to declare any competing financial or other interest in relation to their work. If any author has a competing interest, it should be declared in the covering letter.Any 'in press' articles cited within the references and necessary for the reviewers' assessment of the manuscript should be made available if requested by the editorial office.Submission of a manuscript to Advanced Research Journals implies that readily reproducible materials described in the manuscript, including all relevant raw data, will be freely available to any scientist wishing to use them for non-commercial purposes. Nucleic acid sequences, protein sequences, and atomic coordinates should be deposited in an appropriate database in time for the accession number to be included in the published article. In computational studies where the sequence information is unacceptable for inclusion in databases because of lack of experimental validation, the sequences must be published as an additional file with the article.

Preparing main manuscript text
File formats 
The following word processor file formats are acceptable for the main manuscript document:

  • Microsoft Word (version 2 and above)
  • Rich text format (RTF)

Article types
When submitting your manuscript, you will be asked to assign one of the following types to your article:

Research article

The papers should contain not more than 12–16 typewritten pages or up to 5000 words, including references, tables and figures. Previously reported methods should be referenced only. The number of references should not exceed 35 (except for review articles).

Short Communications

They should be condensed to 4–7 typewritten pages or not more than 2500 words including references and a maximum of two illustrations.

Review Articles

Review articles will only be by invitation. Review articles can provide concise and critical updates on a subject of current interest.

Manuscript sections for Research articles

Style and language
Currently, Advanced Research Journals can only accept manuscripts written in English. Spelling should be US English or British English, but not a mixture.Gene names should be in italic, but protein products should be in plain type.There is no explicit limit on the length of articles submitted, but authors are encouraged to be concise. There is no restriction on the number of figures, tables or additional files that can be included with each article online. Figures and tables should be sequentially referenced. Authors should include all relevant supporting data with each article. Advanced Research Journals will not edit submitted manuscripts for style or language; reviewers may advise rejection of a manuscript if it is compromised by grammatical errors. Authors are advised to write clearly and simply, and to have their article checked by colleagues before submission. In-house copyediting will be minimal. Non-native speakers of English may choose to make use of a copyediting service.

Abbreviations should be used as sparingly as possible. They can be defined when first used. 


  • Manuscripts should be typed using Times new roman with 12 font size and in the single line spacing format because it can save a lot of printed papers for Reviewers so as to slow down the global warming process. Now we are in the Electronic Editing Age, and no longer need the line space to insert texts for editing papers as done before.
  • Type the text unjustified, without hyphenating words at line breaks.
  • Use hard returns only to end headings and paragraphs, not to rearrange lines.
  • Capitalize only the first word, and proper nouns, in the title.
  • All pages should be numbered.
  • Use the Advanced Research Journals reference format.
  • Footnotes to text should not be used.
  • Greek and other special characters may be included. If you are unable to reproduce a particular special character, please type out the name of the symbol in full.

Please ensure that all special characters used are embedded in the text, otherwise they will be lost during conversion to PDF.

SI Units should be used throughout (liter and molar are permitted, however).
Manuscripts for Research articles submitted to Advanced Research Journals should be divided into the following sections:


  • Cover letter
  • Title page
  • Abstract
  • Key words
  • Introduction
  • Material and Methods
  • Results & Discussion
  • Conclusions
  • Authors' contributions
  • Acknowledgements
  • References
  • Figure legends (if any)
  • Tables and captions (if any)
  • Description of additional data files (if any)

You can download a template (Mac and Windows compatible; Microsoft Word 98/2000) for your article. For instructions on use, see below.

Cover Letter
The Cover Letter must include the following: a) a statement regarding financial conflict of interest if any, and, a statement of originality of work, b) a statement pertaining to the compliance with Ethics in Animal and Clinical Investigations, and c) a statement of confidentiality compliance. Authors who wish to submit names and emails for the peer review process must also indicate those in the Cover Letter.The Statement of Originality must verify that the manuscript is not published elsewhere, in any language, and is not under simultaneous consideration by any other journal. The Assurances clause must indicate that the research has been reviewed and approved by an appropriate human or animal research or ethics review committee, or that it has been determined exempt from such review, and the Confidentiality Statement must state: All Authors agree that the contents of the manuscript are confidential and will not be copyrighted, submitted, or published elsewhere (including the Internet), in any language, while acceptance by the Journal is under consideration.

Title page
This should list: the title of the article, which should include an accurate, clear and concise description of the reported work, avoiding abbreviations; and the full names, institutional addresses, and e-mail addresses for all authors. The corresponding author should also be indicated.


The abstract of the manuscript should not exceed 250 words and must be structured into separate sections, the context and purpose of the study; the main findings; brief summary and potential implications. Please minimize the use of abbreviations and do not cite references in the abstract.

Provide a list of not more than 6 key words.

The background section should be written from the standpoint of researchers without specialist knowledge in that area and must clearly state - and, if helpful, illustrate - the background to the research and its aims. The section should end with a very brief statement of what is being reported in the article.

Materials & Methods
This should be divided into subsections if several methods are described 

Results and Discussion The Results and Discussion may be combined into a single section or presented separately. They may also be broken into subsections with short, informative headings.

This should state clearly the main conclusions of the research and give a clear explanation of their importance and relevance. Summary illustrations may be included.

List of abbreviations
If abbreviations are used in the text, either they should be defined in the text where first used.

Authors' contributions
In order to give appropriate credit to each author of a paper, the individual contributions of authors to the manuscript should be specified in this section.An "author" is generally considered to be someone who has made substantive intellectual contributions to a published study. To qualify as an author one should 1) have made substantial contributions to conception and design, or acquisition of data, or analysis and interpretation of data; 2) have been involved in drafting the manuscript or revising it critically for important intellectual content; and 3) have given final approval of the version to be published. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content. Acquisition of funding, collection of data, or general supervision of the research group, alone, does not justify authorship.We suggest the following kind of format (please use initials to refer to each author's contribution): AB carried out the molecular genetic studies, participated in the sequence alignment and drafted the manuscript. JY carried out the immunoassays. MT participated in the sequence alignment. ES participated in the design of the study and performed the statistical analysis. FG conceived of the study, and participated in its design and coordination and helped to draft the manuscript. All authors read and approved the final manuscript.All contributors who do not meet the criteria for authorship should be listed in an acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, writing assistance, or a department chair that provided only general support.

Please acknowledge anyone who contributed towards the study by making substantial contributions to conception, design, acquisition of data, or analysis and interpretation of data, or who was involved in drafting the manuscript or revising it critically for important intellectual content, but who does not meet the criteria for authorship. Please also include their source(s) of funding. Please also acknowledge anyone who contributed materials essential for the study.Authors should obtain permission to acknowledge from all those mentioned in the Acknowledgements.Please list the source(s) of funding for the study, for each author, and for the manuscript preparation in the acknowledgements section. Authors must describe the role of the funding body, if any, in study design; in the collection, analysis, and interpretation of data; in the writing of the manuscript; and in the decision to submit the manuscript for publication.

All references must be numbered consecutively, in square brackets, in the order in which they are cited in the text, followed by any in tables or legends. Reference citations should not appear in titles or headings. Each reference must have an individual reference number. Please avoid excessive referencing. If automatic numbering systems are used, the reference numbers must be finalized and the bibliography must be fully formatted before submission.Only articles and abstracts that have been published or are in press, or are available through public e-print/preprint servers, may be cited; unpublished abstracts, unpublished data and personal communications should not be included in the reference list, but may be included in the text. Notes/footnotes are not allowed. Obtaining permission to quote personal communications and unpublished data from the cited author(s) is the responsibility of the author. Journal abbreviations follow Index Medicus/MEDLINE. Citations in the reference list should contain all named authors, regardless of how many there are.We encourage authors to use a recent version of EndNote 5 (or later versions) or Reference Manager 10 or Publicon when formatting their reference list, as this allows references to be automatically extracted. you should upload the manuscript file containing your EndNote 5 or Reference Manager 10 or Publicon-formatted bibliography as a .doc file. Please ensure you do not convert to another format (e.g. RTF or PDF). On upload you will receive a confirmation on-screen and by email. EndNote 5 or Reference Manager 10 or Publicon users should also make sure that any changes made to the reference list are done within their reference management program, rather than by manually editing the formatted bibliography. This is because manually introduced changes will not be picked up in the automatically extracted list.

Examples of the Advanced Research Journals reference style are shown below. Please take care to follow the reference style precisely; references not in the correct style may be retyped, necessitating tedious proofreading. We provide style files for End Note and Reference Manager.

Advanced Research Journals reference style

  • Article within a journal 1. Lemon SM, Thomas DL. Vaccines to prevent viral hepatitis. N Engl J Med. 1997;336(3):196–204.
  • Article within a journal supplement 2. Orengo CA, Bray JE, Hubbard T, LoConte L, Sillitoe I. Analysis and assessment of ab initio three-dimensional prediction, secondary structure, and contacts prediction. Proteins 1999, 43(Suppl 3):149-170.
  • In press article 3. Kharitonov SA, Barnes PJ. Clinical aspects of exhaled nitric oxide. Eur Respir J, in press.
  • Published abstract 4. zaniffer NJ, faula JA, Maini RN. Mesenchymal cells, stromal derived factor-1 and rheumatoid arthritis [abstract]. Arthritis Rheum 1999, 42:s250.
  • Article within conference proceedings5. Jones X: Zeolites and synthetic mechanisms. In Proceedings of the First National Conference on Porous Sieves: 27-30 June 1996; Baltimore. Edited by Smith Y. Stoneham: Butterworth-Heinemann; 1996:16-27.
  • Book chapter or article within a book6. Crawford JM. The liver and the biliary tract: the liver. In: Cotran RS, Kumar V, Robbins SL, editors. Robbins pathologic basis of disease. 5th ed. Bangalore, India: Prism Books (Pvt.) Ltd.; 1994. p. 844–6.
  • PhD thesis7. Sharma R: performance enhancement of MSP-1. PhD thesis. Stanford University, parasitology Department; 1995.

Microsoft Word template Although we can accept manuscripts prepared as Microsoft Word or RTF, we have designed a Microsoft Word template that can be used to generate a standard style and format for your article. It can be used if you have not yet started to write your paper, or if it is already written and needs to be put into Advanced Research Journals style.Download the template (Mac and Windows compatible Word 1998/2000) from our site, and save it to your hard drive. Double click the template to open it.

How to use the Advanced Research Journals template The template consists of a standard set of headings that make up a Advanced Research Journals Research article manuscript, along with dummy fragments of body text. Follow these steps to create your manuscript in the standard format:

Replace the dummy text for Title, Author details, Institutional affiliations, and the other sections of the manuscript with your own text (either by entering the text directly or by cutting and pasting from your own manuscript document).
If there are sections which you do not need, delete them (but check the rest of the Instructions for Authors to see which sections are compulsory).
If you need an additional copy of a heading (e.g. for additional figure legends) just copy and paste.
For the references, you may either manually enter the references using the reference style given, or use bibliographic software to insert them automatically. We provide style files for End Note and Reference Manager.

For extra convenience, you can use the template as one of your standard Word templates. To do this, put a copy of the template file in Word's 'Templates' folder, normally C:\Program Files\Microsoft Office\Templates on a PC. The next time you create a new document in Word using the File menu, the template will appear as one of the available choices for a new document.


The following file formats can be accepted:

  • PNG (preferred format for photos or images)
  • JPEG
  • Microsoft Word (figures must be a single page)
  • PowerPoint (figures must be a single page)
  • TIFF
  • BMP
  • CDX (ChemDraw)
  • TGF (ISIS/Draw)

Figure legends
The legends should be included in the main manuscript text file, all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
For each figure, the following information should be provided: Figure number (in sequence, using Arabic numerals - i.e. Figure 1, 2, 3 etc); short title of figure (maximum 15 words); detailed legend, up to 300 words.Please note that it is the responsibility of the author(s) to obtain permission from the copyright holder to reproduce figures or tables that have previously been published elsewhere.

Each table should be numbered in sequence using Arabic numerals (i.e. Table 1, 2, 3 etc.). Tables should also have a title that summarizes the whole table, maximum 15 words. Detailed legends may then follow, but should be concise.Smaller tables considered to be integral to the manuscript can be pasted into the end of the document text file, in portrait format (note that tables on a landscape page must be reformatted onto a portrait page or submitted as additional files). These will be typeset and displayed in the final published form of the article. Such tables should be formatted using the 'Table object' in a word processing program to ensure that columns of data are kept aligned when the file is sent electronically for review; this will not always be the case if columns are generated by simply using tabs to separate text. Commas should not be used to indicate numerical values. Color and shading should not be used.

Submission process

Manuscripts must be submitted by one of the authors of the manuscript, and should not be submitted by anyone on their behalf. The submitting author takes responsibility for the article during submission and peer review.During submission you will be asked to provide a cover letter and Names of three referees along with complete contact information. In cover letter explain why your manuscript should be published in the journal, to elaborate on any issues relating to our editorial policies detailed in the instructions for authors, and to declare any potential competing interests.Assistance with the process of manuscript preparation and submission is available from the customer support team ( also provide a collection of links to useful tools and resources for scientific authors, on our Tools for Authors page.

Open Access Fees
Accepted articles will be published online for free open access for all to view. Open access publishing provides the maximum dissemination of the article to the largest audience. Authors must pay for this service. All corresponding authors will be asked to pay their publication charges as open access fee (given below) per published article which allows indefinite free-to-view online publication with Advanced Research Journals.

Open Access Fees

International Authors $ 105.00

Indian Authors         $ 65.00

For more information please contact us at e-mail:


Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

Copyright Notice

Authors who publish with this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

  1. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).


Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.